EVK-L2 - User guide
UBX-14000422 - R11
Appendix
Page 22 of 27
C1-Public
E
Examples of AT commands
For the complete description and syntax of the AT commands supported by each TOBY L2 series
cellular module product version, see the u-blox AT commands manual
[1]
.
For detailed examples of AT commands for network registration and configuration, context
activation, data connection management, SIM management, module interfaces configurations and
other settings, see the u blox AT commands examples application note
[2]
.
For detailed examples of AT commands for TOBY L2 series cellular module networking and IP
connectivity configuration, see the u blox TOBY-L2 series networking modes application note
[5]
.
E.1
Enable communication between cellular and Wi-Fi module
Command sent by DTE (user)
DCE response (module)
Description
AT+UGPIOC?
+UGPIOC:
10,15
11,15
12,15
13,15
21,16
22,255
24,255
25,0
50,12
51,12
52,12
53,12
60,7
61,14
OK
Check the configuration of the GPIO6 pin
(<gpio_id> = 21): it must be configured as Wi-Fi enable
(<gpio_mode> = 16, as the factory-programmed value)
to provide Wi-Fi capability using the u-blox ELLA-W1
series Wi-Fi module mounted on the EVK-L2.
AT+UWCFG=1
OK
Turn on the u-blox ELLA-W1 series Wi-Fi module
mounted on the EVK-L2 (by default it is turned off)
For detailed examples of AT commands for the TOBY-L2 series cellular module and the u-blox
ELLA-W1 Wi-Fi module integration and configuration, see the u-blox Wi-Fi / cellular integration
application note
