EVK-L2 - User guide
UBX-14000422 - R11
Starting up
Page 10 of 27
C1-Public
DIL B2B J201
DIL B2B J200
Signal Name
Pin N° Pin N°
Signal Name
Signal Name
Pin N° Pin N°
Signal Name
HOST_SELECT0
2
1
GND
Not connected
2
1
GND
Not connected
4
3
V_BCKP
Not connected
4
3
Not connected
Not connected
6
5
Not connected
Not connected
6
5
Not connected
GND
8
7
GND
VCC
8
7
VCC
GND
10
9
GND
VCC
10
9
VCC
DTR
12
11
DCD
Not connected
12
11
Not connected
CTS
14
13
RTS
SIM_IO
14
13
VSIM
RXD
16
15
TXD
SIM_RST
16
15
SIM_CLK
DSR
18
17
RI
Not connected
18
17
Not connected
Not connected
20
19
Not connected
SCL
20
19
Not connected
Not connected
22
21
Not connected
Not connected
22
21
SDA
Not connected
24
23
GPIO5
Not connected
24
23
Not connected
Not connected
26
25
GPIO4
RESET_N
26
25
Not connected
Not connected
28
27
Not connected
MIC_BIAS
28
27
MIC_GND
Not connected
30
29
PWR_ON
Not connected
30
29
Not connected
GPIO3
32
31
GPIO2
Not connected
32
31
Not connected
HOST_SELECT1
34
33
GPIO1
SPK_N
34
33
SPK_P
V_INT
36
35
Not connected
Not connected
36
35
Not connected
Not connected
38
37
Not connected
Not connected
38
37
Not connected
Not connected
40
39
Not connected
Not connected
40
39
Not connected
GND
42
41
GND
GND
42
41
Not connected
Table 5: Pin-out of the 42-pin Dual-In-Line Board-to-Board connectors (J201, J200) available on the adapter board ADP-L2
of the EVK-L2 evaluation kit for TOBY-L2 series modules
☞
The pins / interfaces that are not supported by a specific TOBY-L2 module product version should
be not driven by an external device (see the TOBY-L2 series data sheet
and TOBY-L2 / MPCI-L2
series system integration manual
for the features supported by each TOBY-L2 module product
version).
1.7
Software installation
The related USB drivers are available with the EVK-L2. Executable files can be downloaded from
and saved to any location on the computer hard drive. The
installation can be started by running the executable file on a computer with the Windows operating
system.
