WWDLWx User Manual
Date:5-OCT-2020
Ubitech Ltd.
Version: 0.1.1
Page: 13
10
SETUP WITH LoRa NETWORK
10.1
Check Network Status:
-
By brand new default, Custos WWD does not belong to any LoRa Network and it is under shipping mode.
-
To check Custos WWD Network status, trigger the Built-in Leak Sensor;
-
Yellow LED flashing means Custos WWD is in Standalone mode, not joined in LoRa network.
10.2
OTAA Activations:
-
Custos LoRa WWD can support two methods to activate OTAA (time limit mode and forever mode)
i.
Periodically activate OTAA for 3 minutes only.
ii.
Activate OTAA forever.
10.2.1 Time limit activate OTAA:
-
OTAA will be activate only 3 minutes, after that if Custos WWD is not joined to any LoRa Network then it will return to shipping mode,
this keeps lowers power consumption.
i.
Trigger Built-in Water Leak Sensor for 2 seconds comes with Yellow LED Lights on per seconds.
ii.
OTAA will be started per 30 seconds automatically if it’s still remain in standalone mode.
iii.
OTAA success with LoRa Server, 2 Buzzer Sounds and Green LEED on when OTAA success,
iv.
After 3 minutes time-out without OTAA success then it will be back to shipping mode.
10.2.2 Activate OTAA and exits Shipping Mode permanently (Not recommended):
-
OTAA will be activated forever until it joined into a LoRa Network and it will not return to shipping mode anymore,
i.
Trigger Built-in Water Leak Sensor for 5 seconds and comes with Yellow LED Lights on per seconds.
ii.
OTAA will be started per 30 seconds automatically if it’s still remained in standalone mode.
iii.
Yellow LED will keep flashing when OTAA is process with LoRa Server and 2 Buzzer Sounds and Green LEED on when OTAA
success,
