WWDLWx User Manual
Date:5-OCT-2020
Ubitech Ltd.
Version: 0.1.1
Page: 14
10.3
Remove Custos WWD from LoRa Network:
-
If you need to remove the Custos from a LoRa Network and may move it to other LoRa Network,
i.
Remove Device information form LoRa Server, “Please refer to related LoRa Server user manual”;
ii.
Perform Factory Default Reset as item 13.4;
iii.
Follow below procedure to start Exclusion procedure in Custos WWD,
10.4
Factory Default Reset:
-
To remove all Custos WWD settings without involve LoRa Gateway or LoRa Server.
i.
Pick up the Custos WWD;
ii.
Shaking it as illustration (10a) with 5 Buzzer sounds then stop and hold still for 2 seconds;
iii.
You’ll get 2 Buzzer Sounds with Green LED Lights 2 times;
iv.
Trigger the Built-in Leak Sensor as illustration (10b) for 10 seconds with Yellow LED Lights 5 times;
v.
Once success, Green LED Lights up while it’s reseting itself to factory state;
vi.
Then WWD goes into hibernation (Shipping Mode).
OR
10a
10b
