5
www.ubisys.de
u
3.
FEATURES
-
ZigBee 3.0 Certified Load Switch with Integrated Smart Meter and ZigBee Router functionality
-
Smart Mains Power Outlet for 230V~, 16A, 3.680VA
-
S1: One configurable 230V~ input, pre-configured for operating the output locally
S1-R: Two configurable 230V~ inputs, one pre-configured for operating the output locally
Individually reconfigurable as on/off, level control, and scene selector switches for use with momentary or
stationary switches
-
Local control even works when the device is not joined to a network (not commissioned yet)
-
Supports groups, scenes, bindings, and reporting
-
Reliable, unattended, maintenance-free operation;
S1 designed for in-wall flush-mounting,
S1-R designed for DIN rail mounting (fuse cabinet)
-
Employs a latching relay with mains synchronized switching for highest efficiency and durability
-
Maintains the output switching state even during a reboot (for example after a firmware update). Hence,
can be used for critical loads, such as servers, etc.
-
Made in Germany using high-quality, enduring parts for many years of life expectancy
-
Low power dissipation: 0.3W
-
On-board MCU: Advanced 32-bit ARM micro-controller running at 48MHz with 64KB SRAM
-
On-board PHY: Texas Instruments CC2520, 5dBm transmit power, -98dBm receiver sensitivity
-
On-board inverted-F antenna
-
Leverages ubisys IEEE 802.15.4 MAC and ZigBee stack for best-in-class reliability and performance
-
Supports all channels in the 2.4 GHz band, i.e. channels 11-26 as per IEEE 802.15.4:
Primary = { 11, 15, 20, 25 }; Secondary = { 12, 13, 14, 16, 17, 18, 19, 21, 22, 23, 24, 26 }
-
Supports joining centralized and distributed security networks as router
-
Supports forming simple centralized security networks as Coordinator and Trust Center
-
Supports forming distributed security networks as router
-
Three pre-configured Trust Center Link-Keys for joining:
o
Global Default Trust Center Link-Key (“ZigBeeAlliance09”)
o
ZigBee 3.0 Global Distributed Security Link-Key
1
o
Device-individual link-key derived from installation code – also printed as text and QR barcode
-
Extended neighbour table with up to 78 entries for routers and end-devices -
more than three times the capacity required by the standard (25)
-
Extended routing table with up to 96 entries for ad hoc and many-to-one routes -
nearly ten times the capacity required by the standard (10)
-
Extended buffering for sleeping end-devices with up to 24 buffers -
24 times the capacity required by the standard (1)
-
Extended APS duplicate rejection table with up to 64 slots -
64 times the capacity required by the standard (1)
-
Extensive transmit and receive queues for optimum through-put and minimum packet drop rate
-
Reliable and scalable network-wide broadcasts featuring passive acknowledgments
-
Reliable packet forwarding with automatic network-level retries
-
Very sophisticated routing algorithm for reliable ad hoc routing – avoids routing loops even in case of
concurrent route requests with overlapping source/destination
-
Firmware upgradable over-the-air during normal operation using ZigBee OTA Upgrade Cluster
-
Man-Machine-Interface: A push-button and a LED for network steering, factory reset etc.
-
Flame retardant housing (V-0); black, RAL 9005
1
Since application firmware 1.08. Prior, pre-certification key (D0:..:DF)
