Ubisys IEEE 802.15.4 usb stic with wireshark..., Reference Manual

Page: 13 / 30

13 www.ubisys.de

8. Using Wireshark for IEEE 802.15.4 Captures (Quick Introduction)
Start Wireshark to begin a new live-capture.
Figure 6: Wireshark Welcome Screen
Notice that the interface list includes the ubisys IEEE 802.15.4 capture device. If it does not appear on
your system and you recently installed the driver, please restart the packet capture driver (Winpcap),
first. You can either restart your computer or terminate Wireshark and then run the following commands
from a command prompt with elevated user access rights (run as administrator):
C:\WINDOWS\system32>net stop npf
C:\WINDOWS\system32>net start npf
Click on the ubisys USB IEEE 802.15.4 Capture Device for Wireshark item to begin a new live-
capture. The welcome screen disappears and a capture log appears.