Ubiquiti UniFi UVP, User Manual

Page: 6 / 62

2
Chapter 1: Overview UniFi® VoIP Phone User Guide
Ubiquiti Networks, Inc.
Hardware Overview
Front
Camera
(UVP-Pro only)
LED
Touchscreen
Volume
UVP, UVP-Pro
Camera
LED
Touchscreen
Volume
UVP-Executive
Camera (Available on UVP-Pro and UVP-Executive only.)
Built-in camera can be used for snapping photos for
avatars or videoconferencing applications.
Touchscreen The 5" (UVP, UVP-Pro) or 7" (UVP-Executive)
(diagonal) touchscreen display is used for all interface
navigation and dialing.
Volume Use the volume arrows to adjust audio levels.
LED
The LED will illuminate when the device is first
connected to a 48V power source. Once the phone has
started up, the LED will turn off.
IMPORTANT: The LED will flash when a firmware
update is occurring. Do not disconnect power/
Ethernet from the device during this time.
Back Ports
PoE/LAN PC
PoE/LAN PC
UVP, UVP-Pro
PC PoE/LAN
PoE/LAN
PC
USB
UVP-Executive
USB (Available on UVP-Executive only.) The USB port can
connect to an external speaker or a mass storage device.
PoE/LAN
The PoE/LAN Ethernet port is 802.3at-compliant
and is used to connect data and power to the phone.
Connect this port to the same network as the UniFi
Security Gateway VoIP port.
PC The Ethernet port labeled PC is used for bridging.
WARNING: Do not connect a powered Ethernet
connection to the port labeled PC.
www.4Gon.co.uk info@4gon.co.uk Tel: (0)0330 088 0295 Fax: +44 (0)1245 808299