6
Chapter 2: Installation
UniFi
™
AP-PRO and AP-AC User Guide
Ubiquiti Networks, Inc.
7. Turn the UniFi AP-PRO clockwise until it locks into
place.
Ceiling Mount
1. Remove the ceiling tile.
2. Place the
Mounting Bracket
in the center of the ceiling
tile. Mark the three mounting screw holes and 25 mm
hole for the Ethernet cable.
25 mm Hole for Ethernet Cable Feed
3. Use a 3 mm drill bit to drill the screw holes and cut or
drill the 25 mm hole for the Ethernet cable feed.
4. Secure the
Mounting Bracket
to the ceiling tile using
the
Ceiling Backing Plate
,
M3x50 Flathead Screws
and
M3
Keps Nuts.
5. Feed the Ethernet cable through the 25 mm hole.
6. Set the ceiling tile back into place.
7. Connect the Ethernet cable to the
Main/48V
port.
