Hardware Overview
Back Panel
LEDs
Reset Button
USB-C Port
Reset Button
To reset to factory defaults, press and hold the Reset button for
more than 10 seconds while the device is powered on.
USB-C Port
Reserved for future use.
LEDs
5 GHz
5 GHz
The LED will light blue when the 5 GHz link
is active.
GPS
GPS
The LED will light blue when the GPS signal
strength is sufficient. This requires a minimum of
three satellite connections.
UNMS
The center LED will light when there is a
connection to the Ubiquiti® Network Management
System (UNMS
™
) server.
LAN
The LED will light steady blue when an active
Ethernet connection is made to the Ethernet port
and flash when there is activity.
Power
The LED will light blue when the device is
connected to a power source.
Summary of Contents for LTU LR
Page 1: ...5 GHz Subscriber Station Model LTU LR...
Page 5: ...Pole Mounting 1 Remove the lock nut 2 Attach the Mount Bracket...
Page 6: ...3 Replace the lock nut 4 Insert the U Bolt into the Pole Clamp 25 60 mm...
Page 7: ...5 Insert the U Bolt into the Mount Bracket Secure the U Bolt with the Washers and Flange Nuts...
