Connecting to the PoE Adapter
1. Connect the Ethernet cable from the device to the POE
port of the Gigabit PoE adapter.
2. Connect an Ethernet cable from your LAN to the LAN port
of the Gigabit PoE adapter.
3. Connect the Power Cord to the Gigabit PoE adapter.
Connect the other end of the Power Cord to a power outlet.
Mounting the PoE Adapter (Optional)
1. Remove the PoE Mounting Bracket from the adapter, place
the bracket at the desired location, and mark the two holes.
2. Pre-drill the holes if necessary, and secure the bracket
using two fasteners (not included).
3. Align the slots on the back of the adapter with the tabs of
the PoE Mounting Bracket, and then slide the adapter down.
Summary of Contents for LTU LR
Page 1: ...5 GHz Subscriber Station Model LTU LR...
Page 5: ...Pole Mounting 1 Remove the lock nut 2 Attach the Mount Bracket...
Page 6: ...3 Replace the lock nut 4 Insert the U Bolt into the Pole Clamp 25 60 mm...
Page 7: ...5 Insert the U Bolt into the Mount Bracket Secure the U Bolt with the Washers and Flange Nuts...
