Ubiquiti LTU-Lite, Quick Start Manual

Page: 3 / 19

Ethernet Port
Reset Button
Blue Initial power-up.
Flashing White Bootup in progress.
White Ready for use.
Alternating
Blue/White
Firmware upgrade in progress.
This 10/100/1000 Ethernet port is used to connect the power and should be connected
to the LAN and DHCP server.
To reset to factory defaults, press and hold the Reset button for more than 10 seconds
while the device is powered on.
Hardware Installation
1.
2.
LTU-Lite Quick Start Guide