Ubiquiti LTU-Lite, Quick Start Manual

Page: 14 / 19

4. Select your Country and Language. You must agree to the Terms of Use to use the
product. Click Continue.
The LTU Configuration Interface will appear, allowing you to customize your settings as
needed.
UISP Management
You can manage your device using UISP, which lets you configure, monitor, upgrade, and
back up your devices using a single application. Get started at uisp.ui.com
Find My AP
1. Click the icon.
2. In the Wireless Settings section, change the channel bandwidth (default: 20 MHz) as
needed.
3. Click Find AP.
4. The device will scan for nearby APs. Click Select for the appropriate AP. To run the search
again, click Scan.
5. Follow the on-screen instructions.
Installer Compliance Responsibility
Devices must be professionally installed and it is the professional installer’s responsibility
to make sure the device is operated within local country regulatory requirements.
The Auto Output Power field is provided to the professional installer to assist in meeting
regulatory requirements.
Specifications
LTU-Lite
Dimensions 153 x 84 x 39.5 mm
(6.02 x 3.31 x 1.56")
Weight 250 g (8.82 oz)
Networking Interface (1) 10/100/1000 Ethernet Port
Enclosure Outdoor UV Stabilized Plastic
Note: For example, if the AP’s channel bandwidth is set to 50 MHz and your
device is set to 20 MHz, then your device will not see that AP and you should
change the channel bandwidth on your device.
LTU-Lite Quick Start Guide