4. Enter a Username and Password, confirm the Password, and click Save.
5. Click the
icon.
6. Configure the following settings:
a. For one device, enable Access Point mode. For the other device (the
Station), keep Access Point disabled.
b. Enter a name in the SSID field. This must be the same on both the AP and
the Station.
c. In the WPA2 Preshared Key field, enter a combination of alphanumeric
characters (0-9, A-Z, or a-z).
Note:
The key is an alphanumeric password between 8 and 63
GBE-LR Quick Start Guide
