36
Chapter 9: Toolbox
EdgeRouter
™
Lite User Guide
Ubiquiti Networks, Inc.
Trace
The
Trace
tool traces the hops from the EdgeRouter to a
specified outgoing IP address. Use this tool to find the
route taken by ICMP packets across the network to the
destination host.
Destination Host
Enter the IP address of the destination
host.
Resolve IP Address
Select this option to resolve the IP
addresses symbolically (as names) instead of numerically.
Run Test
Click this button to start the test.
Responses are displayed after the test is completed.
Discover
The
Discover
tool searches for all Ubiquiti devices on your
network. The
Search
field automatically filters devices
containing specified names or numbers as you enter
them.
All/eth_
Select which interface to search, or select
All
.
The tool reports the number of
Discovered
and
Displayed
Ubiquiti devices. A table displays the following
information about each Ubiquiti device. Click a column
heading to sort by that heading.
Interface
The EdgeRouter interface used by the device is
displayed.
Hardware Address
The MAC address of the device is
displayed.
Device Name
The name assigned to the device is
displayed.
Product Name
The Ubiquiti name of the device is
displayed.
IP Address
The IP address of the device is displayed. You
can click it to access the device’s configuration through its
web management interface.
For more information, click the arrow to view the
following:
•
Firmware Version
The version number of the device’s
firmware is displayed.
•
Uptime
The duration of the device’s activity is
displayed.
•
Addresses
The addresses of the device’s interface are
displayed. If the device has more than one interface,
addresses for each interface are displayed.
-
hwaddr
The MAC address of the device’s interface is
displayed.
-
ipv4
The IP address of the device’s interface is
displayed.
Packet Capture
Capture packets traveling through the specified interface
for analysis. You can set up filters to capture the specific
types of packets you are seeking.
Interface
Enter the name of the interface.
Packet Limit
Enter the number of packets to capture. The
maximum number is 300.
Resolve addresses
Select this option to resolve the IP
addresses symbolically (as names) instead of numerically.
Filter
•
Protocol
Enter the protocol to filter.
•
Address
Enter the address to filter.
•
Port
Enter the port number to filter.
•
Negate filter
Check this box to capture all packets
except for the ones matching the selected filter(s).
Summary of Contents for ERLite-3
Page 1: ...3 Port Router...
