Configuring PoE Settings
WARNING:
Before activating 24V passive PoE, ensure
that the connected device supports PoE and the
supplied voltage.
1. Go to Actions > PoE for the interface you want to configure.
2. Select 24V from the PoE drop‑down menu.
Note:
If the PoE screen states that PoE is not supported,
then there is insufficient power. You will need to increase
the power input to the EdgePoint.
3. Click Save.
For more information, refer to the EdgeOS User Guide, which is
available at documentation.ubnt.com/edgemax
16
EdgePoint EP‑R6 Quick Start Guide
