5. When you are finished, replace the port cover.
Optional: You can use an M4x6 set screw (not included) to
secure the port cover.
Mounting the Gigabit PoE Adapter (Optional)
1. Remove the PoE Mounting Bracket from the adapter, place the
bracket at the desired location, and mark the two holes.
2. Pre‑drill the holes if necessary, and secure the bracket using
two fasteners (not included).
3. Align the slots on the adapter with the tabs on the PoE
Mounting Bracket, and then slide the adapter down.
14
EdgePoint EP‑R6 Quick Start Guide
