Ubiquiti airFiber AF-5XHD, Quick Start Manual

Page: 38 / 46

6. Slave Aim the Slave at the Master to achieve the strongest signal level on the Master.
Note: Refer to the Signal LEDs section for details on the signal values.
Note: Maximum signal strength can best be achieved by iteratively sweeping
through both azimuth and elevation.
7. Master Aim the Master at the Slave to achieve the strongest signal level on the Slave.
8. Repeat steps 4 and 5 until you achieve an optimal link, with all four Signal LEDs solidly lit. This
ensures the best possible data rate between the airFiber radios.
9. Lock the alignment on both airFiber antennas by tightening all the nuts and bolts.
10. Observe the Signal LEDs of each airFiber radio to ensure that the values remain constant while
tightening the nuts and bolts. If any LED value changes during the locking process, loosen the
nuts and bolts, nalize the alignment of each airFiber antenna again, and retighten the nuts
and bolts.
Installer Compliance Responsibility
AF-5XHD Quick Start Guide