Ubiquiti airFiber 60, Quick Start Manual

Page: 22 / 33

Adjust the elevation:
±20
Note: Do NOT make simultaneous adjustments on
the AP and Station.
2. Station Visually aim the Station at the AP. To adjust the
Station’s position, adjust the azimuth and elevation as
described in step 1.
3. Open the Configuration Interface. Select Tools and then
select Align Antenna.
4. Check to see if a link is established. Ensure that the 60G LED
or the 5G LED is solidly lit blue.
5. Station Aim the Station at the AP to achieve the strongest
signal level on the AP.
Note: Maximum signal strength can best be achieved
by iteratively sweeping through both azimuth and
elevation.