Ubiquiti air Grid M2 AGM2-HP-1114, Quick Start Manual

Page: 4 / 20

2
airGrid
™
AGM2-HP-1114 Quick Start Guide
Installation Requirements
• 10 mm wrench
• Shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections and should be grounded through
the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial-grade shielded Ethernet cable from Ubiquiti
Networks
™ . For more details, visit www.ubnt.com/toughcable
Hardware Installation
1. Attach the Feed Support and L Bracket to the Grid Reflector.
a. Orient the Grid Reflector for the appropriate polarization,
horizontal or vertical.
WARNING: The polarization of the airGrid must match
the polarization of its corresponding device (horizontal
to horizontal, vertical to vertical).
b. With the cable opening facing down, insert the Feed Support
into the Grid Reflector and L Bracket.
c. Secure the Feed Support and L Bracket to the Grid Reflector
with the four M6x20 Bolts, four M6 Lock Washers, and four
M6 Washers.
Horizontal Polarization Vertical Polarization