background image

Feil! Stil er ikke definert.

 

 

2.5  Special safety references 

 

2.5.1  Safety devices 

• 

Before operating the unit all protective devices as well as all removable parts must 
be installed correctly and be fully workable. 

• 

Protective devices may only be removed: 

• 

after stand still and 

• 

prevention of unintentional restart. 

• 

If partial components are delivered, an authorized staff member or service tech-
nician has to execute assembly according to installation guidelines. 

2.5.2  Informal safety steps 

• 

The operating manual is to be kept constantly accessible in the operating area. 

• 

In addition to the operating manual all generally acknowledged and all local regula-
tions for accident avoiding and environmental protection have to be applied with. 

• 

All safety- danger labels at the unit are to be kept in readable condition. 

2.5.3  Education of the personal 

• 

Only trained and instructed personal may work at the unit. 

• 

The responsibilities of the personal are to be determined clearly for installing, start-
up, operation, assembling, and servicing of the unit. 

• 

During instruction the personal may only work at the unit under supervision of an 
experienced person. 

2.5.4  Unit-control 

• 

Only instructed personal is allowed to operate the controls. 

2.5.5  Safety during regular operation 

• 

The unit is only to operate if all protective devices are fully workable. 

• 

At least once per shift the unit is to be examined with regard to visible damages and 
functional ability of the safety devices. 

2.5.6  Dangers caused by electric energy 

• 

Any work on the electrical supply is to be executed only by a specialist. 

• 

Likewise the electrical connection of this unit to the power supply must be executed 
by an electro-specialist; the connection must follow the rules of the local determina-
tions. 

• 

The electric installation is to be examined regularely. Loose connections and brased 
cabels are to be eliminated immediately. 

• 

If works at any life-parts are necessary, a second person who switches off the main 
switch if neccessary is to consult. 

2.5.7  Special danger-spots 

• 

Remove the cover plate only if unit is switched off! 

• 

Do not touch the refrigerator when unit is switched on! 

• 

Do not touch the evaporator! Danger of injuring oneself! 

printed: 03/2010  Subject to change! 

 

 GourmetLineUserManualDKTG 

Summary of Contents for DKT 31





















Reviews: