14
14.
Install the Grease Tray
Install the Grease Tray (X) from the rear of the grill
by sliding the tray on the glides at the rear of the
grill until centered under the cooking area
As shown in Figure 18
15.
Position Flame Tamers and Cooking Grids
a) The Flame Tamers (ZA) are shipped in the main
firebox assembly. Please check the placement of
and make sure the Flame Tamers (ZA) in the channels
to ensure the Flame Tamers are centered over the burners.
b) The Cooking Grids (ZB) are also shipped in the
Firebox Assembly (A). Place the Cooking Grids (ZB) in the
main firebox assembly before using your grill. The Cooking
Grids (ZB) should be positioned from the front of the firebox
to the rear for a proper fit.
16
. Liquid Propane Tank Installation
From rear of grill place the liquid propane
tank into the Bottom Panel (B) hole
and tighten the Tank Bolt (EE)
to secure. As shown in Fig.19.
17.
Liquid Propane Hook-Up
Attach the regulator to the propane cylinder by
turning the regulator handle clockwise as shown
in Fig. 20. If the outdoor cooking appliance is not
in use, the gas must be turned
“
OFF
”
at the Liquid
Propane Cylinder.
Check all gas supply fittings for leaks before
each use. Do not use the grill until all connections
have been checked and do not leak
(see
“
Leak Testing
”
instructions on page 16).
Fig. 20
Propane Cylinder
Regulator
Fig. 19
Tank Bolt
Always keep the LP cylinder at
90
°
(upright) orientation to
provide vapour withdraw.
Fig.18
X
W
10 0
20 0
30 0
4 00
50 0
6 00
7 00
80 0
文件使用
"pdfFactory Pro"
试用版本创建
