11
6.
Condiment Tray Assembly
Use four 5/32-in. x 10-mm Truss Head
Screws (AA) and four 5/32-in. Locking
Washers (BB) to attach the Condiment
Tray (T) to the Cart Leg, Front Left (F)
and Cart Leg, Front Right (I). Use two
5/32-in. x 10-mm Truss Head Screws (AA)
And two 5/32-in. nut (II) to secure underside
Of the Condiment Tray. As shown in Fig. 8.
Hint: The Condiment Tray (T) will sit
above Front Panel (S) as shown in
Fig. 8. Be sure the Condiment Tray (T)
opening is facing outward towards the
front of the grill.
7.
Fix Bar Assembly
Remove the two 5/32-in. X 15-mm
Truss Head Screws that are at the rear of
the cart legs. Then place the Fix Bar (N)
in the pre-drilled holes on the sides of the
Condiment Tray (T). From the outsides
of the Condiment Tray secure the bar
with the two 5/32-in. 15mm screws.
As shown in Fig. 9.
8.
Diagonal Bar Barrier
Use one 5/32-in. x 10-mm Truss Head
Screw (AA) with one 5/32-in. Locking
Washer (BB) and one 5/32-in. Nut (II) to
secure one side of the Diagonal Bar
Barrier (Y) to the underside of the
Condiment Tray (T). Use one 5/32-in.
x 10-mm Truss Head Screw (AA) and one
5/32-in. Locking Washer (BB) to assemble
the other side of the Diagonal Bar Barrier (Y)
to the Bottom Panel (B). As shown in Fig. 10.
9.
Cart Beam Assembly
Using four 5/32-in. x 10-mm Truss Head
Screws (AA) and four 5/32-in. Locking
Washers
(BB) to connect the Cart Beam(R)
to Cart Leg, Back Left (G) and Cart Leg,
Back Right (J). As shown in Fig. 11.
NOTE: Smooth side of Cart Beam (R) should
face away from cart.
Fig. 8
Fig. 9
Fig. 10
AA
BB
R
T
Fig. 11
Y
AA
I
J
G
AA
II
T
AA
BB
II
B
T
文件使用
"pdfFactory Pro"
试用版本创建
