Install On Wall
4. Drill three holes according to the mark for each bracket. The diameter of the drill head
should be 14mm. The hole must be longer than the bolt. With the help of hummer, insert the
setscrew into the drilled hole except the end part with nut. Fix the bracket to the wall and
tighten the nut.(Required tools but not provided)
Installation of Awning
2 adults are needed to handle this operation. With help, lift awning to the brackets on wall and
slip torsion bar into brackets as shown in the following Fig..If torsion bar can not be easily
slipped into the bracket, lift the front profile slightly. If it still does not work, loosen nuts (7)
on the bracket to align the torsion bar with bracket. Finally, tighten all bolts securely.
Summary of Contents for 77805028
Page 1: ......
