Uberhaus 15625000, Operator'S Manual, Page: 24 / 60

3
- / + button
4
FAN button
This button is used for setting Fan Speed in the sequence that goes from AUTO,
5
I FEEL button
6
SLEEP button
NOTE: Your model of air conditioner has 3 speeds.
, , , to then back to Auto.
Auto
Speed 1 Speed 2 Speed 3
Speed 4
● Pr or - button once will increase or decrease set temperature by 1°F(°C).
Hold + or - button for 2s, set temperature on remote controller will change quickly.
Release the button after your required set temperature is reached.
● When setting Timer On or Timer Off, press + or - button to adjust the time. (See
TIMER Button for setting details)
Press this button is to activate "I FEEL" function. Under this function, the sensor
in remote control will send the temperature around the remote to the unit every
10min, and the unit will cycle to reach the temperature sent by the remote.
Press this button again to turn off this function.
Operation Guide
Press this button to activate Sleep Mode. Within 2 hours after Sleep Mode is
activated, set temperature will be increased by 1
℃
/2
℉
per hour. For the entire
night under Sleep Mode, set temperature will increase by 2
℃
/4
℉
. Press this button
again to turn off the Sleep Mode. Sleep Mode is available in Cool, Energy s aving
and Dry modes.
22