Uberhaus 15625000, Operator'S Manual, Page: 21 / 60

2
Mode button
Press the Mode button repeatedly to select the operating mode, according to the
sequence below. The matching indicator light will turn on.Please note that under Auto
mode, no indicator light will be on.
● Cool: Under this mode, air conditioner operates under cooling mode. Cooling
indicator will be on. Press “Fan Speed” button to adjust the fan speed.
● Auto: Under this mode, the unit will operate automatically according to
factory settings. In this case, set temperature cannot be adjusted.
● Energy s aving:
● Fan Only: Under this mode, air conditioner will not cool or heat, only blow
wind. Fan indicator will be on. Press “Fan Speed” button to adjust the fan
speed. (Fan speed cannot be set to Auto in this mode)
● Dry: Under this mode, the unit runs in low fan speed for dehumidification and
the corresponding indicator is on; under dry mode, the fan speed cannot be
adjusted.
Dry
Cool Auto
Fan
Only
Energy
s aving
1
Power button
Press this button to turn on or turn off air conditioner.
3
Fan Speed button
Press the Fan Speed button repeatedly to select the fan speed, according to the
sequence below. The matching indicator light will turn on.
Auto High Med Low
4
Timer button
Timer ON: Set Timer ON while the unit is turned off. The air conditioner will operate in
Energy-saving mode once it turns on.
The setting range is 0.5~24hr.
Timer OFF: Set Timer OFF while the unit is turned on. The air conditioner will turn off
once the timer is activated.
increments for 10 hours or above.
NOTE:When the air conditioner is turned on, it will first operate in Energy-saving
mode. In case of a power failure, the unit will maintain the setting when power comes
back on.
adjusted. The air conditioner will cycle on and off to maintain the temperature
and fan speed you set.
Under Energy Saving mode, both temperature and fan speed
can be
The timer can be set in 0.5 hour increments, between 1 and 10 hours; or in 1 hour
Operation Guide
19