Fig.9: Attach the Arc support bar 1/2 (E2/F2) to the Post (D2) & decorative beam with Hex bolt (CC) &
Large flat washer (BB). Repeat on all posts.
Fig.10: If gazebo is installed on grass, secure to the ground with pegs (HH).
Fig.10-1: If the gazebo is installed on a concrete surface, secure to the ground with anchors (II).
Hardware Pack 3
BB
Φ
1/4" Large flat washer
64 PCS
CC
1/4"-20*0.6 Hex bolt
16 PCS
DD
1/4"-20*0.6 Bolt
32 PCS
EE
1/4"-20*2.125 Bolt
16 PCS
FF
1/4"-20 Nut
16 PCS
Fig.11: Attach the Top slanting bar (B3) onto the Corner connector (F1) by using Bolt (EE) & Large flat washer (BB).
Repeat on all sides.
Fig.12: Attach the Top slanting bar (B3) onto the Top frame (A3) by using Bolt (CC) & Large flat washer (BB).
Repeat on all sides.
Fig.13: Attach the Middle beam of top (C3) onto the Middle beam Connector (E1) by using Bolt (EE) & Large flat
washer (BB) and Nut (FF).
Fig.14: Attach the Middle beam of top (C3) onto the Top frame (A3) by using Bolt (CC) & Large flat washer (BB).
