Hardware Pack 1
AA
1/4"-20*1.25 Hex bolt
8 PCS
BB
Φ
1/4" Large flat washer
40 PCS
CC
1/4"-20*0.6 Hex bolt
32 PCS
KK
Ring (Pre-assembled)
60 PCS
LL
Clips (Pre-assembled)
32 PCS
Z
Φ
1/4" Wrench
2 PCS
Fig.5
：
Attach Short bar (H1) / Long bar (G1) to Long right decorative beam 1 &
Long left decorative beam 2 (B1) / Short right decorative beam 1 (C1) & Short
left decorative beam 2 (D1) by using Hex bolt (CC) & Large flat washer (BB).
Fig.1
：
Insert Long left decorative beam 2 (Short left decorative beam 2) B1 (D1) into Long right decorative beam 1 /
(Short right decorative beam 1) A1 / (C1); tighten with Hex bolt (CC) & Large flat washer (BB). Repeat on all sides.
Fig.2
：
Attach assembled beams to another respectively and tighten all with Hex bolt (AA) & Large flat washer (BB).
Fig.3
：
Attach the middle beam connector (F1) on the middle of decorative beams with Bolt (CC) & Large flat washer
(BB). Repeat on all sides.
