7
10)
Lock the front wheels with brakes.
11)
Place the keg into the cooler.
12)
Install the coupler onto the keg.
13)
Power up the keg cooler by plugging it into a power outlet. If beer in
the keg is already chilled, it can be served at 5C (40F) after 30 minutes.
WARNING: Please keep a CO2 cylinder away from the back side of the
beer cooler to prevent heating up on the cylinder.
5.1 Cleaning and maintenance.
Automatic defrosting:
There is no need to defrost the refrigerator, because ice depositing on
the evaporator is defrosted automatically.
Ice build-up on the evaporator during compressor operation; will (when
the compressor has cycled off) defrost automatically. Defrost water
collects inside the drain trough and passes through the drain outlet in
the rear wall into a drain pan situated above the compressor, where it
evaporates.
Cleaning the keg cooler:
Always disconnect the power cord before cleaning and/or servicing the
appliance. Do not use coarse or aggressive cleaning agents as they
can damage painted surfaces. Clean the exterior cabinet with warm
water and a mild detergent. Clean the interior with warm water and a
mild detergent, adding one or two spoonfuls of vinegar. After cleaning,
connect the appliance to power supply.
SWITCH OFF AND/OR DISCONNECT THE APPLIANCE WHEN NOT
IN USE:
If you do not intend to use the appliance for long periods of time unplug
the power cord. Take out all foods and clean the appliance. Leave the
door slightly open to reduce mold/mildew from accumulating inside the
cabinet.
5.2 Disposal of the keg cooler
DISPOSAL OF WORN OUT APPLIANCES
• When your keg cooler finally wears out, dispose of it in a safe and
harmless manner. If you have bought this appliance to replace an old
one equipped with a door lock that cannot be opened from the inside,
(lock bolt) make sure the lock is removed, disabled or destroyed before
discarding. This will make it impossible for children to accidentally lock
themselves inside the appliance and suffocate.