ubbink Ubiflux W180, Installation Instructions Manual

Page: 103 / 164

Ubiflux W180 / W180+ 19
The service menu shows the most recent 10 fault messages.
In the event of a locking fault, the settings menu and the re-
adout menu are blocked and only the service menu can be
opened; Pressing the ‘menu’ key directly opens the service
menu (only for a locking fault).
The service menu can be called up as follows:
1. In operating mode, press the ‘ MENU ’ key. The display now
shows the settings menu.
2. Use the ‘+’ and ‘-’ keys to go to the service menu.
3. Activate the service menu .
4 Use the ‘ + ’ and the ‘- ’ key to scroll through the readout
menu’.
- Display not any fault message.
- Current fault message (spanner on display).
- Unsolved fault message (no spanner on display).
5 Press the ‘ R ’ key twice to go to operating mode.
If no key is operated during 5 minutes, the appliance auto-
matically returns to operating mode.
All fault messages can be deleted by pressing the “R” key in
the service menu during 5 seconds; This is only possible when
there is no active fault!
Display layout Chapter 6
6.5 Service menu
Fault code; Refer
to § 8.1 and § 8.2
for a fault code
explanation
No. fault message
settings menu
operating mode
service menu
operating mode
2x