![background image](http://html1.mh-extra.com/html/ubbink/ubiflux-series/ubiflux-series_manual_3126564085.webp)
82
Ubiflux F300 / F300+
GB
STEP NO. DESCRIPTION
FACTORY SETTINGS
UBIFLUX F300+
ADJUSTING RANGE
STEP
19
Extract fan mode
switching input 1
5
0 (= Extract fan off)
1 (= Absolute min. flow rate 50m
3
/h)
2 (= Flow rate mode 1)
3 (= Flow rate mode 2)
4 (= Flow rate mode 3)
5 (= Multiple switch)
6 (= Maximum flow rate)
20
Selection input 2
ON
OFF ( = Switching input 2 active)
ON (= 0 - 10 volt input 2 active)
21
Minimum voltage input 2
0,0 V
0,0 Volt - 10,0 Volt
0,5 V
22
Maximum voltage input 2
10,0 V
0,0 Volt- 10,0 Volt
0,5 V
23
Conditions
switching input 2
0
0 (off)
1 (on)
2 (= On if conditions
bypass open satisfied)
3 (= Bypass control)
4 (= Bedroom valve)
24
Supply fan mode
switching input 2
5
0 (= Input fan off)
1 (= Absolute min. flow rate 50m
3
/h)
2 (= Flow rate mode 1)
3 (= Flow rate mode 2)
4 (= Flow rate mode 3)
5 (= Multiple switch)
6 (= Maximum flow rate)
25
Extract fan mode
switching input 2
5
0 (= Extract fan off)
1 (= Absolute min. flow rate 50m
3
/h)
2 (= Flow rate mode 1)
3 (= Flow rate mode 2)
4 (= Flow rate mode 3)
5 (= Multiple switch)
6 (= Maximum flow rate)
26
Geo heat exchanger
UIT
OFF (= Valve control geo heat
exchanger off)
ON (= Valve control geo heat
exchanger on)
27
Minimum temperature
geo heat exchanger
(Below this temperature
the valve opens.)
5,0 °C
0,0 °C - 10,0 °C
0,5 °C
28
Maximum temperature
geo heat exchanger
(Above this temperature
the valve opens.)
25,0 °C
15,0 °C - 40,0 °C
0,5 °C
Modifications reserved
Ubbink B. V. continuously strives after improvement of products and reserves the right to change the specifications
without prior notice.
12
Instelwaarden / Setting values
Einstellwerte / Valeurs de réglage