7
Table of Contents
User’s manual
7
Introduction
I Description Control unit
7
II Symbols used
8
1 Technical specifications
8
1.1 General product specifications
8
1.2 Environmental influences
8
1.3 Overview operational controls
8
1.4 Overview display version main screen
8
1.5 Ventilation modes
8
2 Precautionary measures and safety instructions
8
2.1 General
8
2.2 During placement
8
2.3 During use
9
2.4 During maintenance
9
2.5 For the environment
9
3 Assembly and installation (to be performed by the
installer)
9
3.1 Assembly
9
3.1.1 Disconnecting the operational module from the
wall bracket
9
3.1.2 Electrical connection
9
3.1.3 Mounting the wall bracket
9
3.1.4 Replacing the operational module in the wall
bracket
9
3.2 Installation
9
3.2.1 Setting language
9
3.2.2 Setting time
9
3.2.3 Setting date
10
3.2.4 Selecting a device connected to the
Control unit
10
4 Description of operation; manner of use
10
4.1 Navigation: general description
10
4.2. Selecting a device connected to the
Control unit
10
4.3 Weekly programmes: P1, P2 and P3
10
4.3.1 Standard settings P1, P2 and P3
10
4.3.2 Creating a P1 programme
10
4.3.3 Creating a P2 programme
10
4.3.4 Creating a P3 programme
11
4.4 Activating programme type (P1, P2 or P3)
11
4.5 Temporarily overriding programme
11
4.6 Overriding programme for a longer period of time 11
4.7 Setting ventilation mode values
12
4.8 Retrieving settings
12
4.9 Factory settings connected device
12
5 Maintenance
12
5.1 General maintenance
12
5.2 Cleaning or replacing filter
12
5.2.1 Filter notification
12
5.2.2 Removing, cleaning or replacing filters
12
5.2.3 Re-setting filter notification
12
6 Dismantling
12
7 Repair
12
8 Environment
13
9 Troubleshooting and guarantee
13
9.1 Troubleshooting
13
9.2 Guarantee
13
Appendix 1 Standard settings weekly programmes 13
User’s manual
Dear client,
Thank you for buying the Control unit. This user’s manual con-
tains all required information to quickly become familiar with
the product. We kindly request you to carefully go through this
information before using the product.
This user’s manual is intended for the Control unit’s installer
and end user. You can retrieve the required information from
the user’s manual via the table of contents.
This is an extended user’s manual. A Quick Start Guide is
available, in addition to this user’s manual.
Take good care of this user’s manual!
For more information or ordering manuals, please contact:
Ubbink nv
Jan Samijnstraat 9
9050 Gentbrugge
Belgium
Tel: +32 9.237 11 00
Fax: +32 9.237 11 29
E-mail: [email protected]
www: www.ubbink.be
Introduction
I Description Control unit
Intended and unintended use
The Control unit should be used in combination with products
that have been approved by Ubbink. Ubbink cannot be held
responsible for possible damage caused by improper, incor-
rect or unwise use. It is important that one understands this
user’s manual completely.
Working with other devices
The Control unit is connected to other devices. The HRU is
co-dependent on these devices’ operation for its proper func-
tioning. These devices’ presence and proper functioning are
prerequisites for using the Control unit.
