10
Klokregeling / Control unit / Bedienmodul / Contrôle digital
main screen
• Press
1
. ‘Main Menu’ opens
• Select ‘Basic Settings’ by turning
1
• Press
1
. ‘Basic Settings’ opens
• Select ‘Date’ by turning
1
• Press
1
. ‘Date’ opens
• Change the day by turning
• Press
1
to confirm the day
• Repeat the previous two steps for both the months and
the year
• Press return
2
as many times as necessary to get to the
main screen
3.2.4 Selecting a device connected to the Control unit
You can choose the device you want to regulate with the con-
trol if multiple devices are connected to Control unit. Proceed
as follows to set the appliance selection (see
1
&
13
):
• Press return
2
as many times as necessary to get to the
main screen
• Press
1
. ‘Main Menu’ opens
• Select ‘Installer’ by turning
1
• Press
1
. ‘Installer’ opens
• Select ‘device’ by turning
1
• Press
1
. to confirm selected device
If only one appliance is connected, no choice is offered and
only HRU appliance is displayed.
4 Description of operation: manner of use
You can increase or decrease the ventilation mode with the
Control unit. You can do this by setting a program. You can
temporarily override the program while it is running.
4.1 Navigation: general description
Navigating through menus
The Control unit has menus that you can navigate through. For
this you use navigation button
1
(see
1
). You scroll through
the menus by turning the navigation button
1
(see
9 B
). You
can open a selected menu-item by pressing the navigation
button(see
9 A
).
Return to the main screen
The main screen (see
2
) is the Control unit’s start screen. You
can always return to the main screen by pressing on the info
button
2
(see
1
) a few times. The number of times you need
to press return depends on how deep you have gone into the
menu. U need not be afraid of pressing return too frequently.
4.2. Selecting a device connected to the Control
unit
You can choose the device you want to regulate with the con-
trol if multiple devices are connected to Control unit. See §
3.2.4.
4.3 Weekly programmes: P1, P2 and P3
You can programme the regulation of the ventilation mode in
a weekly program. You can choose from programs P1, P2 and
P3.
Program P1
With this you create a day program for every day of the week.
Program P2
With this you create two day programs. One day program
for weekdays ‘mo-fri’ and one day program for the weekend
‘sa-su’.
Program P3
With this you create seven day programs. Separately for every
day of the week.
4.3.1 Standard settings P1, P2 and P3
The Control unit has standard set weekly programmes. You
can find these settings in appendix 1.
4.3.2 Creating a P1 program (see
1
)
• Press return
2
as many times as necessary to get to the
main screen
• Press
3
.‘Setting & activating timer programme’ opens
• Select ‘P1: week’ by turning
1
• Press
1
, ‘P1: week’ opens
You have a choice from ‘Period 1’, ‘Period 2’, ‘Period 3’, ‘Period
4’, ‘Period 5’ and ‘Period 6’. Every period is a part of the day in
which you can set a ventilation position.
Perform the following actions to set period 1:
• Select ‘Period 1’ by turning
1
• Press
1
, ‘Period 1’ opens
• Select ‘Start Time’ by turning
1
• Press
1
, ‘Start time’ opens
• Change the start time by turning
1
You have a range of between 3.00u and 2.59u
If in a period the time is turned back so far that lines
appear, that period and the one above it will be deleted.
• Press
1
to confirm the start time
Now set the ventilation mode for period 1.
Perform the following actions for this:
• Select ‘Ventilatiestand’ by turning
1
• Press
1
, ‘Ventilatiestand’ opens
• Set the ventilation mode for period 1 by turning
1
• Press
1
to confirm the ventilation mode for period 1
You have set the ventilation mode for period 1 You can set
period 2 through 6 in the same manner. A period ends when a
new one starts.
4.3.3 Creating a P2 program (see
1
)
• Press return
2
as many times as necessary to get to the
main screen
• Press
3
.‘Setting & activating timer programme’ opens
• Select ‘P2: week/weekend’ by turning
1
• Press
1
, ‘P2: week/weekend’ opens
You can choose between ‘Week’ and ‘Weekend’. With ‘Week’
you can set a day program for Monday through Friday. With
‘Weekend’ you can set a day program for Saturday and
Sunday.
Week
