UAZ HUNTER 315195, Operating Manual

Page: 109 / 136

109
Additional brake alarm lamp. To change the bulbs, loosen
two screws and remove the rear cap of the lamp.
Maintenance of the horn
amounts to periodic checking it
for fastening, tightening of wire clamps, cleaning it from dust
and dirt and also checking the sound intensity and adjusting as
required.
Adjust the horn at the service station.
relays and fuses
Two fuse boxes (Fig. 9.43) with thirteen fusible links each
are placed under the instrument panel to the left of the steering
column. The bracket with the relay is placed on the front left
side panel from the driver's side (Fig. 9.44).
Fig. 9.42. Screen markings for
front fog lights adjustment:
H — distance from the front fog
lights center to the ground level;
L — distance between the front
fog lights centers
Fig. 9.41. Screen markings for headlamps adjustment:
H — distance between the headlamp center and the ground level; V-V — vehicle's
longitudinal axle shaft projection; A-A, B-B — axle shafts of headlamp centers