RT-2087/ZPX-A User and Installation Guide
UAV-1005667-001 Rev A
ECCN 7A994
Page 47 | 48
C.4 Third-party Equipment
The following devices are reported to be compatible with supported ZPX-A
control protocols. These EFIS displays have the capability to send
barometric pressure altitude data and control the mode and squawk
functions of ZPX-A through any available RS-232 serial output. ZPX-A
configuration must still take place through the “ping200X Control & Config”
Windows application.
Note
– These devices may not support X-bit control.
Manufacturer
Model
ZPX-A
Protocol
Configuration
Function
Provided
GRT
MINI-B
Apollo
Serial Output: SL70/STX175
Serial Rate: 57600
Control
MINI-AP
MINI-X
Sport EX
Horizon EX
MGL
iEFIS
Apollo
Type: STX165(R)
Serial Rate: 57600
Control
Xtreme
EFIS
For complete functionality, ensure both a position source and controller are
connected.
Proper operation of the interface and system, with the specific equipment
configuration, must be demonstrated at installation time.
C.4.1
ZPX-A Configuration
Configure the ZPX-A as appropriate, ensuring the following values have
been updated from defaults:
Parameter
Value
In Protocols
UCP and Apollo
Out Protocols
Apollo
Serial Port Baud Rate
57600 or as appropriate
Baro Altitude Source
External
