RT-2087/ZPX-A User and Installation Guide
UAV-1005667-001 Rev A
ECCN 7A994
Page 38 | 48
STEP
CHECK
Press ‘Start’ in ‘ping200X Control & Config’ Windows
application
With a Pitot Static Test Set connected, select the ‘Service’
tab
Press ‘Get’ to retrieve the calibration information
Adjust Pitot Static Test Set to the Low calibration altitude
Wait for Pitot Static Test Set to reach the Low calibration
altitude, then click 'Start'
Wait for calibration to complete
Adjust Pitot Static Test Set to Mid calibration altitude
Wait for Pitot Static Test Set to reach the Mid calibration
altitude, then click 'Start'
Wait for calibration to complete
Adjust Pitot Static Test Set to the High calibration altitude
Wait for Pitot Static Test Set to reach the High calibration
altitude, then click 'Start'
Wait for calibration to complete
Click ‘Send’ to send updated calibration to the device
11 Normal Operation
ZPX-A should be enabled, typically in ALT mode, during all phases of flight,,
including surface movement operations.
12
Maintenance
ZPX-A is not a user serviceable product. All service must be performed
either by uAvionix or an authorized uAvionix repair center.
13
Support
For additional questions or support please visit:
https://www.uavionix.com/support/
