UAV-1004178-001 Rev A
ECCN 7A994
Page
16 | 28
6.2.1 nano Control Head Operation
MODE
STBY
Standby and Programming Mode
ON
ADS-B and Mode S Active, altitude (Mode C) reporting
disabled
ALT
ADS-B and Mode S Active, altitude reporting
enabled
ADSB Mode S disabled, ADS-B active (Development Only)
Mode S Activity
Flashing – Mode S activity
Health
Flashing – Communications Healthy
Flashing – Communications Healthy and GPS locked
6.2.2 Thumb Wheel Selection
The nanoHead Control unit is controlled and configured via the thumb
wheel at the bottom of the device. Move your thumb across the wheel to
select the desired character you would like to change. Once you reach the
desired character, press the thumb wheel to select the character. Once you
have selected the character, move your thumb across the thumb wheel to
cycle through character options to choose. Once you have the character
you want, click the thumb wheel once more to set the character.
