UAV-1004178-001 Rev A
ECCN 7A994
Page
20 | 28
7.6 Cooling Requirements
ping200XR is designed to meet all applicable TSO requirements without
forced-air cooling.
Attention should, however, be given to the incorporation of cooling
provisions to limit the maximum operating temperature if ping200XR is
installed in close proximity to other avionics. The reliability of equipment
operating in close proximity in an avionics bay can be degraded if adequate
cooling is not provided.
7.7 Antenna Installation
The following considerations should be taken into account when siting the
antenna.
•
The RF antenna should be mounted in a vertical position when the
aircraft is in level flight.
See figure below for proper orientation
.
