UAV-1003946-001, AV-30-C
Pilot’s Guide
36
Revision D
Page
7.8.2 Changing Squawk
•
Press and release the center knob
.
•
Navigate highlighted cursor to desired digit by rotating the knob
.
•
Press and release the center knob to select the squawk digit to change
.
•
Rotate the center knob to change the highlighted squawk digit
.
•
Press and release the center knob to accept the changed squawk
.
•
Press and release the left button (
DONE
) to finish and save the setting
.
7.8.3 Changing Flight ID
•
Press and release the center knob
•
When the Squawk code is displayed, push and hold the center button
again until FLIGHT ID appears
•
Press and release to enter the first value
•
Rotate center knob to change the Flight ID value. When desired value
appears, push the center knob to accept the value
•
Push and release the right button (CLEAR) at any time to clear the
Flight ID completely
•
Navigate highlighted cursor to desired character by rotating the knob
•
Repeat until the entire Flight ID has been entered
•
Press and release the left button (DONE) to finish and save the setting
Note:
No spaces are permitted in the FLIGHT ID
7.8.4 Changing Transponder Mode
•
Press and release the center knob
.
•
Press and release the right button to cycle through each mode selection
(STBY, ON, ALT)
.
•
Press and release the left button (
DONE
) to finish and save the setting
.
7.8.5 To Send IDENT
•
Press and release the left button
