UAV-1004045-001 AV-30-C ICA
20
Revision A
2. Remove the wrapped battery pack and pull gently on the
battery wires close to the connector to disconnect the battery
from the unit.
Keyed Battery
Connection
Thermal
Insulation
Heater
Connection
(Leave
Unconnected)
Pull to Disconnect
3. Un-wrap the old battery pack and do not discard the thermal
insulation.
4. Re-wrap the new battery pack and insert into the battery cover,
leaving the battery connection wires outside of the wrapping.
5. Locate the keyed side of the battery connector and press firmly
into the mating connector on the unit.
6. Tuck the battery wire into the battery cover while aligning the
battery cover to the rear of the unit – ensure the battery wires
are not caught or compressed between the battery cover and
the unit.
7. Replace the two battery cover hold-down screws and tighten
firmly.
8. Dispose of the old battery pack in accordance with local
regulatory requirements regarding Lipo battery disposal or
recycling.
