UAV-1004045-001 AV-30-C ICA
15
Revision A
7.9 Altimeter Test and Calibration Procedure
Altimeter calibration must be done in accordance with
14 CFR Part
91.411 Altimeter system and altitude reporting equipment tests and
inspections
.
User interface control and operation required to enter and navigate the
maintenance mode is provided here.
For a full description of the user interface, refer to document
AV-30-C,
Pilots Guide.
7.9.1 Display Mode and Baro Setting
For these purposes, the user interface must be configured to show
altitude. If altitude is not configured for display, refer to
AV-30-C
Pilots Guide
for procedures to configure altitude to be shown.
The baro setting must be set to 29.92 for these tests.
