UAS C Series, Owner'S Manual

Page: 6 / 32

2.3 AIR FILTERING OPERATION
Normal operation consists of the air filtering
operation and the resulting clean air discharge.
During the air filtering operation, contaminated air is
drawn into the UAS Cyclone Dust Collector through
the air inlet located on the upper barrel above the
internal helix (see Figure 1). The contaminated air
spirals downward and accelerates as the cone
narrows whereby higher centrifugal forces are
exerted on dust particles in the airstream. As the
contaminated air travels down the cone, it
accelerates and the particles are thrown to the
periphery of the airstream. Aided by gravity, the
heavy particles are discharged into a dust-tight
container (i.e. drum or hopper). As the particles drop
out, the exhaust airstream spirals upward inside the
downward stream of contaminated air into the fan
housing and is then exhausted into the atmosphere.
NOTE: For fine dust and dust with low densities, the
cyclone should be considered only as a
pre-cleaner. Secondary filtration may be
required.
3. SPECIFICATION TABLE
3
Model
C-192-ID 850 - 1,200
1,250 - 2,000
1,500 - 2,500
2,000 - 3,500
3,000 - 4,600
4,000 - 5,700
4,300 - 7,000
4,500 - 7,500
5,000 - 8,000
8,000 - 11,000
8,000 - 13,000 18.9 - 7.1
15.2 - 5.5
16.2 - 7.0
15.0 - 6.3
11.4 - 4.9
9.5 - 4.8
9.9 - 4.9
13.5 - 4.4
11.4 - 4.9
7.5 - 3.7
8.0 - 4.6 4,328 - 6,110 6" 8"
10"
10"
12"
14"
14"
16"
16"
16"
20"
20"
2 7.5 112" 36" 36" 410 lbs.
§124" 36" 36" 635 lbs.
§126" 36" 36" 645 lbs.
§142" 36" 36" 740 lbs.
§163" 36" 36" 1,005 lbs.
§165" 36" 36" 1,180 lbs.
*271" 90" 52" 3,180 lbs.
*271" 90" 52" 3,295 lbs.
*274" 90" 52" 3,340 lbs.
*321" 85" 61" 4,955 lbs.
*323" 85" 61" 5,165 lbs.
7.5
7.5
7.5
7.5
7.5
60
60
60
110
110
3
5
7.5
10
15
20
25
30
40
50
8"
8"
10"
12"
12"
14"
14"
14"
18"
18"
3,580 - 5,729
3,395 - 5,659
3,667 - 6,417
3,820 - 5,857
5,093 - 7,257
4,022 - 6,548
4,209 - 7,015
3,581 - 5,730
4,527 - 6,225
4,527 - 7,356
C-203-ID
C-205-ID
C-247-ID
C-3010-ID
C-3015-ID
C-3620C60H
C-3625C60H
C-3630C60H
C-4440C110H
C-4450C110H
* Standard 5'6" under hoppers. C60 or C110 hopper available with all models.
+ Approximate; motor weight will vary.
§ Add 12" for 2D arrangement.
CFM
External
Static
Pressure
(WG)
Inlet
Velocity
(FPM)
STD
Inlet
Size
STD
Outlet
Size
Motor
TEFC
(HP)
Dust
Storage
Capacity
(STD)FT 3
H W D
Dimensions
Shipping
Revised 06/07
C-Series
Cyclone Dust Collector