5
Safety Instructions
Please ensure you read and understand the installation instructions entirely before
attempting to install and configure MCL 5 IP.
Always disconnect the mains supply while installing or servicing the communication
interfaces, antenna or changing SIM card.
Only the authorized service persons with adequate qualifications can perform
installation, uninstallation and parameterization of the GSM/GPRS controller MCL 5
IP. National wiring rules should be followed while installing and using the controller.
All equipment interconnected with this product should comply with the requirements
of EN 60950-1:2006 (Personal computer, etc.) or other adequate safety standard
applicable to the equipment (electricity meters).
GSM/GPRS controller should be mounted in restricted access locations. Only
authorised personnel should be able to access this location.
Some parts may remain energized even if the power is disconnected! Do not try to
disassemble internal components. There are no serviceable parts inside.
