Controlling
Before packing the SECURE 3, it has to be checked by authorized service people.
In the case of throwing, the rescue has to be checked from the manufacturer
or the authorized person. If the parachute has to be packed, the pulling power has
to be checked. This has to be between 7 and 9 kg.
Additionally the connection line, between rescue release handle and rescue container is not ad-
justed too long and not too short. The rescue relese handle should be able to be released without
major resistance and needs to be tested through the compatability verification.
attEntiOn:
The trial release needs to be performed after every
repacking. The opening force has to be between 4 and 8 daN.
Damage
If there are some damages while checking the parachute, the parachute has to be
sent to the manufacturer ort he authorized person.
attEntiOn:
Repairs only occur at the manufacturer or at an authorized U-Turn
competence center.
Maintenance and Care
To clean the canopy use warm water and a soft sponge.
If you use a detergent for hard stains, make sure that you rinse intensively a& erwards.
Never apply any chemicals for cleaning, they weaken the material and damage the coating.
Store your parachute at a dry and dark location away from any chemicals. After 6 Month or one
flighthour, whichever occurs first, your SECURE 3 has to be inspected by the manufacturer, in
case of extreme use we are glad to do that earlier. Only you know about the condition of your
parachute. Should there be a need for any repairs they are to be done by the manufacturer.
Storage
The rescue system should be stored at a dry and cool place. Oils, paints, solvent, acid and other
harmful substances should not be stored in close distance of the rescue system
In case you do not use the SECURE for a longer period of time it is recommended to unpack
it and store it loosely rolled up in an air-permable bag. Before re-packing it should be aerated
again.
Seite 3
