- 22 -
Step 1.
Scan the above QR code to download the U-tec App, or search “U-tec” in App
Store (iOS) or Google Play (Android).
Step 2.
Open the U-tec App, register a U-tec account and log in U-tec account.
Note:
If you have registered a U-tec Account, please skip this step.
Step 3.
Make sure you completed Admin code register and Admin Code correct.
Step 4.
Turn on the Bluetooth on your smart phone, stay near the lock (within 10 feet /
3 meters) and search the lock in U-tec App.
Step 5.
Click this lock in the device list and input Admin Code which you have created.
Step 6.
U-tec App will pair UL300 automatically. You will get UL300 in the device list.
Step 7.
Start using the App to control UL300.
3.2. 2 Pair UL300 by U-tec App
Note:
(1)If you have multiple locks, please remove all batteries to power off the other unregistered UL300
temporarily. You don’t need to power off the registered UL300 due to U-tec App shows these locks
as Registered.
(2)Admin Code needs to be programmed in the first step, if you haven't set it up, please Program it.
(3)If you forget the Admin Code, we recommend resetting UL300 to factory settings, then follow
the steps for Programming it again.
(4)If you only set up fingerprint or fob in the first step and don’t set up Admin Code, please go to
menu to edit Admin again.
Scan QR code to download the App
ENGLISH
