U.S.
Solid®•
USS-DBS Models • All Rights Reserved •
Page 9
U.S.
Solid®
• 1200 E.55th Unit C, Cleveland, OH, 44103 • www.ussolid.com
VI. Maintenance and Cleaning
To get the best results and for product longevity, be sure to follow the
suggestions below.
Note: All of the suggestions and guidelines mentioned below and through-
out this manual will only be effective with continuous and careful mainte-
nance of the equipment
•
Follow all processes outlined in the manual
•
Make the manual available to all users of the equipment
•
Prevent the balance from any sudden movements or falls, as well as
from direct sunlight or air flow. The balance is a precision instrument
and must be handled carefully.
•
Balance must be plugged into a grounded electrical outlet and the
socket should be easily accessible to unplug in case of emergency
•
Never unplug the balance by pulling on the wire, do so from the base
•
Never use the balance in a wedged-in location, such as a shelf
•
Never use other objects such as pens, pencils, etc. to press the but-
tons on the control panel; use only your fingers.
•
Never place anything on the pan heavier than the maximum capaci-
ty of the balance, or the sensor could be damaged
•
Do not submerge the balance, nor spill any liquids on it
•
If any liquid does come into contact with the electrical parts of the
balance, immediately disconnect it and send it in for service to be
checked and adjusted if necessary
•
Always use only original components and supplies. Other devices and
parts may appear similar, but can damage the equipment.
Cleaning
•
Never use scourers or substances that can grate to clean metallic
parts. This include, but is not limited to, stainless steel, aluminum, coat-
ings, etc.. These can damage the balance and lead to early erosion
of effectiveness of the balance.
•
-Use a lint-free cloth, dampened with soapy water, that does not con-
tain any abrasive surfaces, nor corrosive materials
ATTENTION!! If equipment is not properly
cleaned and cared for, technical service
will be unable to fix or repair issues.
