Table of Contents & Introduction ..................................................... 2
Symbols & Decals ................................................................... 3
Safety Instruction ................................................................... 4 - 5
Pre-Operation ...........................................................................6
Operation ..................................................................................7 - 9
Parts ............................................................................. 10 - 11
Related Products & Accessories .................................................... 12
Warranty & Service ............................................................. 13 - 14
1.0
INSTRUCTIONS FOR USE OF MANUAL SECTIONS
Section Page
2.0 SPECIFICATIONS
Foreword/Introduction
2
This manual outlines the maintenance and operation of the Core EZ. This
is a professional tool and is intended for use by trained and experienced
operators. To get maximum benefit from your tool and to ensure maximum
safety, be sure to read this manual thoroughly. You should also periodically
review safety instructions.Keep all manuals provided with your equipment in
a safe place at all times.
The information and specifications included in this publication were
in effect at the time of approval for printing. U.S.SAWS reserves the right,
however, to discontinue or change specifications or design at any time with
-
out notice and without incurring any obligation.
The U.S.SAWS Core EZ Core® makes core drilling easy by utilizing standard
110 V power. U.S.SAWS Core EZ offers a new way of core drilling. The entire
unit and a selection of bits fit into a wheeled case that weighs under 50
pounds. The Core EZ drills holes from 3 into 10 in with ease. The entire unit
is mounted on a central guide shaft rigidly anchored to the wall that
supports the weight of the tool during the drilling process. Having the sys-
tem’s anchor in the middle of the hole eliminates damage to the wall.
Read this entire operations and maintenance manual before using your new
tool. Pay close attention to the Rules for safer operation
,
Disclosure
By purchasing and using the Core EZ, you agree to release U.S.SAWS
of any and all liability. Under no circumstances will U.S.SAWS be held
liable for incidental or consequential damages resulting from the use
of this product and/or defective parts or products associated with this
product.
• It is the responsibility of the owner/user to ensure that the operat-
ing instructions have been read and understood by the operator
before the operation of the equipment begins.
• It is the responsibility of the owner/user to understand and per-
form the maintenance and storage procedures as
explained in the operating instructions.
TO PREVENT SERIOUS INJURY DO NOT OPERATE SAW WITHOUTPROPER TRAINING AND.
UNDERSTANDING OF THE OWNERS MANUAL
WHEN OPERATING THIS MACHINE
ALWAYS WEAR SAFETY APPROVED
HEARING PROTECTION
EYE OR FACE PROTECTION
PROTECTIVE HELMET
PROTECTIVE GLASSES OR FULL FACE PROTECTION
WEAR HAND PROTECTION
WARNING: Improperly maintaining the JS including the Honda engine or failing to correct a problem before
operation could cause a malfunction resulting in a serious injury. Always perform a pre-operation inspection before
each operation and correct any problem. See Honda Engines Owner's Manual.
5.2
Check the condition of the Honda engine. See the section titled "Before operation - is your
engine ready to go?" in the Honda Engines Owner's Manual.
WARNING: Exhaust gas from gasoline engines contains dangerous carbon monoxide. Breathing it can cause
unconsciousness and even kill you. Always operate gasoline engine machines in a well-ventilated area. Do not
operate in areas where exhaust fumes could accumulate without wearing appropriate respiratory protection.
Consult your employer and OSHA regarding use of appropriate respirator for dangerous carbon monoxide
gases. See Figure 7.
EEnnggiinnee eexxhhaauusstt ccoonnttaaiinnss
ppooiissoonnoouuss ccaarrbboonn
m
moonnooxxiiddee ggaass.. Breathing
it could cause death.
Operate machine in well
ventilated area.
FFiigguurree 77 -- W
Waarrnniinngg llaabbeell -- eennggiinnee eexxhhaauusstt ccoonnttaaiinnss ccaarrbboonn m
moonnooxxiiddee ggaass
1111
INTRODUCTION & SPECIFICATIONS
This tool creates an enormous amount of force.
Beware of crushing your fingers or other body parts.
SPECIFICATIONS
Waterworks
Division
P: 866 987-7297 F: 813-621-7125
Visit us at www.ussaws.com
Part Number
US28000
Capacity
3”-10” Core Bits
Electrical Requirements
120V (minimum 15 Amps)
Motor
W24-230 9” Metabo Grinder
Dimensions
24”x 17”x 11”
Weight
65 Lbs.
