background image

SKU 99925 

For technical questions, please call 1-800-444-3353. 

Page 4

maintain tools.  check for mis-

e. 

alignment or binding of moving 

parts, breakage of parts and any 

other condition that may affect the 

tool’s operation.  if damaged, have 

the tool repaired before use.

  Many 

accidents are caused by poorly main-

tained tools.

use the tool in accordance with 

f. 

these instructions, taking into ac-

count the working conditions and 

the work to be performed.  

Use of 

the tool for operations different from 

those intended could result in a haz

-

ardous situation.

service

5. 

have your tool serviced by a quali-

a. 

fied repair person using only iden

-

tical replacement parts.  

This will 

ensure that the safety of the tool is 

maintained.

air compressor safety Warnings

Risk of fire or explosion - do not 

1. 

spray flammable liquid in a confined 

area or towards a hot surface. Spray 

area must be well-ventilated. Do not 

smoke while spraying or spray where 

spark or flame is present. Arcing 

parts - keep compressor at least 20 

feet away from explosive vapors, 

such as when spraying with a spray 

gun.
Risk of bursting - do not adjust 

2. 

regulator to result in output pressure 

greater than marked maximum pres-

sure of attachment.
Risk of injury - do not direct air 

3. 

stream at body. To reduce the risk of 

electric shock, do not expose to rain. 

Store indoors.

Do not use to supply breathing air.

4. 

Do not direct air flow from the Com

-

5. 

pressor at people or animals.
Industrial applications must follow 

6. 

OSHA requirements.
Maintain labels and nameplates on 

7. 

the tool.  These carry important safety 

information.  If unreadable or miss-

ing, contact Harbor Freight Tools for a 

replacement.
Avoid unintentional starting.  Prepare 

8. 

to begin work before turning on the 

tool.
Do not leave the tool unattended 

9. 

when it is plugged into an electrical 

outlet.  Turn off the tool, and unplug it 

from its electrical outlet before leav-

ing.
This product is not a toy.  Keep it out 

10. 

of reach of children.
WARNING:  The brass components 

11. 

of this product contain lead, a chemi-

cal known to the State of California 

to cause birth defects (or other repro-

ductive harm). (California Health & 

Safety code § 25249.5, 

et seq.

)

People with pacemakers should 

12. 

consult their physician(s) before use.  

Electromagnetic fields in close prox

-

imity to heart pacemaker could cause 

pacemaker interference or pacemak-

er failure.  In addition, people with 

pacemakers should: 

• Avoid operating alone.

 

• Do not use with power switch locked 

on. 

• Properly maintain and inspect to 

avoid electrical shock. 

• Any power cord must be properly 

grounded.  Ground Fault Circuit Inter-

Summary of Contents for 99925















Reviews: