background image

SKU 99925 

For technical questions, please call 1-800-444-3353. 

Page 10

maintenance and 

serVicing

  Procedures not specifically 

explained in this manual 

must be performed only by a 

qualified technician.

 

to preVent 

serious injurY 

From accidental 

operation: 

turn the power switch of the 

tool to its “oFF” position and 

unplug the tool from its 

electrical outlet before 

performing any inspection, 

maintenance, or cleaning 

procedures.
to preVent serious 

injurY From tool 

Failure: 

do not use damaged 

equipment.  if abnormal noise 

or vibration occurs, have the 

problem corrected before 

further use.

cleaning, maintenance, and 

lubrication

BeFore each use,

1. 

 inspect the 

general condition of the tool.  Check 

for loose screws, misalignment or 

binding of moving parts, cracked or 

broken parts, damaged electrical wir-

ing, and any other condition that may 

affect its safe operation.

aFter use,

2. 

 clean external surfaces 

of the tool with clean cloth.

3. 

Warning!  if the supply cord of 

this power tool is damaged, it must 

be replaced only by a qualified 

service technician.

please read the FolloWing 

careFullY

THE MANUFACTURER AND/OR DISTRIBUTOR 

hAS PRovIDED thE PARtS LISt AND 

ASSEMbLy DIAgRAM IN thIS MANUAL AS 

A REfERENCE tooL oNLy.  NEIthER thE 

MANUFACTURER OR DISTRIBUTOR MAKES 

ANY REPRESENTATION OR WARRANTY OF 

ANY KIND TO THE BUYER THAT HE OR SHE 

IS qUALIfIED to MAkE ANy REPAIRS to thE 

PRoDUCt, oR thAt hE oR ShE IS qUALIfIED 

to REPLACE ANy PARtS of thE PRoDUCt.  

IN FACT, THE MANUFACTURER AND/OR 

DIStRIbUtoR ExPRESSLy StAtES thAt 

ALL REPAIRS AND PARtS REPLACEMENtS 

ShoULD bE UNDERtAkEN by CERtIfIED 

AND LICENSED tEChNICIANS, AND Not by 

thE bUyER.  thE bUyER ASSUMES ALL RISk 

AND LIAbILIty ARISINg oUt of hIS oR hER 

REPAIRS to thE oRIgINAL PRoDUCt oR 

REPLACEMENt PARtS thEREto, oR ARISINg 

oUt of hIS oR hER INStALLAtIoN of 

REPLACEMENt PARtS thEREto.

Summary of Contents for 99925















Reviews: