SKU 46862
for technical questions, please call 1-800-444-3353.
Page 5
wHeneVeR pOSSiBle, uSe A wincH (nOt pROVided)
tO lOAd tHe AtV.
this is the safest way to load an AtV.
the winch and mounting/connection points must all have appropriate capacity
to pull the AtV up the ramp safely.
ATV-Mounted Winch Setup: Unwind cable from the winch and attach it to a secure
mounting location on the truck, at the same height as the winch will be after the ATV
has been loaded.
Truck Mounted Winch Setup: Attach the cable to the bottom front part of the frame.
While operating the winch, stand back and to the side of the ATV, with the vehicle
between you and the winch cable.
Operate the winch to slowly load the ATV onto the vehicle.
expeRt lOAding diRectiOnS
Only fOR expeRienced RideRS tHAt HAVe Been tRAined
And ceRtified By tHe ASi (AtV SAfety inStitute).
By Attempting tHeSe diRectiOnS, yOu ARe
AgReeing tHAt yOu ARe SucH A tRAined, ceRtified
RideR And tHAt yOu undeRStAnd tHAt yOuR SAfety
in peRfORming tHiS pROceduRe iS BASed On yOuR
ABility tO cOntROl tHe VeHicle.
Have an assistant monitor the Ramp tongue for slippage on the tailgate.
confirm that the weight of the AtV and rider combined is still less than the 1250
lb. capacity of this ramp.
While wearing a safety helmet, drive your ATV onto ramp at less than 1 Mile Per Hour
using the slowest gear possible. Drive up at a slow, steady speed while leaning forward
on the front pegs to keep proper balance. Try to avoid bouncing or jerking, because they
will increase stress on the ramp.
wARning! Be SuRe tHe 4-wHeeled AtV iS centeRed On RAmp.
Once load is in truck bed, be sure to set the ATV’s brake & securely tie down ATV. Remove
the ramp, fold it up and secure it with the
Safety chains and Hooks (2)
.
caution! contact between the tongue (angled lip) of the ramp and the tailgate
of the vehicle may result in damage to the vehicle’s body finish.
•
•
•
•
•
•
1.
2.
3.
4.
ReV 10/06
