SKU 46862
for technical questions, please call 1-800-444-3353.
Page 3
check for damaged parts.
Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts or
mounting fixtures; and any other condition that may affect proper operation.
note:
Dents
or other imperfections in the Ramp may lead to a weakening of the structural strength of
this product; do not use the ramp if this type of damage is noted.
Replacement parts and accessories.
When servicing, use only identical replacement
parts. Use of any other parts will void the warranty.
do not use this product if under the influence of alcohol or drugs.
Read warning
labels on prescriptions to determine if your judgment or reflexes are impaired while taking
drugs. If there is any doubt, do not use the Ramp.
maintenance.
For your safety, maintenance should be performed regularly by a quali-
fied technician.
ground contact.
Use your Ramps on a solid, level, flat, dry surface. Make sure the
Tongue edge fully contacts the tailgate of the vehicle
.
17. clean Ramps
.
Prior to each use, clean dirt, oil, or any debris off ramps.
load vehicle slowly. never ride a vehicle down the load ramp.
never exceed the 1250 lb. maximum, including people pushing the load.
Doing so
can result in personal injury and/or damage to the ramp.
Be aware of dynamic loading!
If you drop a load on the ramp or if the load bounces, it may create, for a brief instant, an
excess load which may result in damage to the ramp and/or personal injury.
warning: the warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
it must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
unpacking
When unpacking, check to make sure the parts listed at the end of this manual are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number on the cover of this manual.
12.
13.
14.
15.
16.
17.
18.
19.
